Roof space planned around structure, stairs and the whole house
Loft Conversion Fulham
North Star Building Solutions delivers loft conversions in Fulham, coordinating survey, planning, roof structure, stairs, fire safety, insulation, building services and interior finishing as one construction programme.
Every scope is reviewed against the actual property, available design information and agreed construction responsibilities before work begins.
A successful loft starts with usable geometry
Ridge height, roof pitch, purlins, chimney breasts and the proposed stair position are measured before a conversion type is selected. In Fulham, Victorian and Edwardian terraces, maisonettes and town houses often contain successive rear additions, altered drainage and mixed service routes. Compact gardens, shared walls and differences in level make measured investigation essential before the structure or final quotation is fixed. A broad postcode or a neighbour’s dormer does not prove that the same solution will fit the property.
The new floor, beams, roof framing and load paths are coordinated with retained walls and ceilings. Temporary support and weather protection are planned before the roof is opened, while access for steelwork and waste is considered alongside the structural design.
Fire doors, alarms, protected escape routes, guarding and staircase headroom affect the existing floors as well as the loft. Insulation, airtightness, ventilation, summer overheating and acoustics are then fitted into a limited roof build-up without blocking drainage or future maintenance access.
Usable space rather than a nominal loft area
The design tests where full-height circulation, storage and furniture will actually fit. Chimneys, purlins and party walls are measured together with the staircase below. If a bathroom is proposed, drainage, ventilation, hot-water performance and waterproofing are coordinated before the floor and dormer build-ups are enclosed.
- Review roof visibility and property planning history.
- Resolve dormer drainage and thermal junctions.
- Coordinate fire doors and alarms across all storeys.
- Keep eaves and service access practical after completion.
Measured roof survey
Usable height, pitch, structural members, chimneys, party walls and obstructions are recorded before floor area is promised.
Staircase integration
The stair is tested against headroom, landings, doors and the existing circulation so it feels like part of the home.
Structural sequence
Beams, floor members, dormer framing and bearings follow the engineer’s information and an agreed temporary support method.
Fire and escape strategy
Detection, doors, linings, structural protection and escape routes are coordinated across every affected storey.
Comfort and energy
Insulation continuity, thermal bridges, airtightness, ventilation, heating and overheating risk are reviewed at roof junctions.
Interior completion
Storage, lighting, sockets, bathrooms, joinery, flooring and decoration are set out before first fix and enclosure.
Genuine project evidence
The archive sequence shows structure, first fix and completed interiors relevant to the careful coordination required for an upper-floor conversion. These photographs come from the North Star project archive. They demonstrate relevant construction stages but do not identify a client or claim that every image is from one named London address.
Permissions, neighbours and protection
The London Borough of Hammersmith and Fulham planning history, conservation context and any property restrictions are checked for the exact address. Permitted development is not assumed, and Building Regulations, Party Wall and ownership approvals remain separate. Roof visibility, property type, previous development and any lease terms are reviewed before the consent strategy is treated as settled.
Controlled parking, narrow side access, small storage areas and close neighbours require planned deliveries, scaffold, waste removal, temporary weathering and dust separation. The occupied house is separated from dust and falling material, and a temporary-roof response is agreed for vulnerable stages.
Our delivery sequence
- Survey the roof and affected house.
- Test conversion type and staircase geometry.
- Coordinate planning, structure and Building Regulations information.
- Plan scaffold, access, protection and temporary weathering.
- Install steelwork, floor structure and roof framing.
- Complete services, insulation, fire protection and interiors.
- Test, snag, certify and hand over.
Frequently asked questions
Is every roof suitable for conversion?
No. Usable height, pitch, structure, stair geometry, ownership and planning constraints must be tested. Sometimes a different roof solution or wider renovation is required.
Does a dormer always need planning permission?
No single answer applies. Dimensions, position, property history, conservation controls and visibility determine whether permission or another approval route is needed.
Can a bathroom be included?
Often, provided drainage, pressure, hot-water capacity, ventilation, structure, waterproofing and electrical zones can be coordinated.
How is the existing house protected?
Scaffold, temporary weathering, dust separation, safe access, alarms and protection of retained finishes are planned before the roof is opened.
What information makes a Fulham quotation dependable?
Measured drawings, the existing-condition survey, structural and service information, the approval route, finish selections and site logistics should be sufficiently developed for allowances and exclusions to be stated clearly.
Watch a completed North Star project
Discuss your Fulham loft conversion project
Send the property address, proposed work, available drawings and target timing. North Star Building Solutions will explain the practical next step and the information needed for a dependable scope.
Request a consultationOffice: 020 3797 6399Mobile / WhatsApp: 07883 535012